Umbrella Stand
We're really excited about this design. This thing is the Rolls Royce of umbrella stands!
It's an umbrella stand, it's a cheeseplate and the pole easily unscrews from the base when you don't need it.
The baseplate has a total of 40 threaded mounting points in 1/4-20" and 3/8-16" sizes for all your rigging needs. Monitors, FIZ hand units, lights, you can mount whatever you need to this thing!
The baseplate needs to be bolted to your cart using 5/16-18" countersink bolts (supplied) and requires that you drill 4 holes (11/32" is a good fit) in the top shelf of your cart. Once mounted, this creates a very sturdy platform for the Rain City Cart Umbrella.
The hollow aluminum pole threads on and off the baseplate easily by hand.
A set screw in the pole can be tightened against your umbrella if needed when the wind picks up. You will need a 5/32" allen key for this set screw.
Specs
Pole
12" x 1 3/4"
Inside diameter of pole - 1 1/2"
Set screw - 5/16-18"
Hardware Supplied:
1 1/4" long countersink bolts (4)
Washers (4)
Nylon Nuts (4)
Set screw (1)
Baseplate
10" x 10" x 3/8"
3/8-16" threaded holes x 20
1/4-20" threaded holes x 20
Mounting holes require 5/16-18" countersink bolts (supplied)
Hard anodized black